Tuning for SSDs

On servers with SSDs:

  1. Enable TRIM operation in the mfs.conf file, if recommended by the SSD vendor.
    By default, TRIM is disabled. To enable, set the value for mfs.ssd.trim.enabled to 1 in the mfs.conf file. For example:
  2. Create storage pool with multiple SSDs (so that the throughput is less than 2GB/sec).
    Note: Create one storage pool per SSD only if the device is high-end.
    To create, run disksetup:
    /opt/mapr/server/disksetup -W <n> disks.txt
    For example, to create a storage pool with 2 SSDs, run the following command:
    /opt/mapr/server/disksetup -W 2 disks.txt
    For more information, see disksetup.